Model :Gino
Keyword :Based on IoT architecture;Industrial Measurement
400-820-7939
Technical Support:021-50687686
Gino is a miniature spectrometer based on IoT architecture. The spectrometer utilizes a Czerny-Turner optical path design based on planar optical
The spectrometer utilizes a Czerny-Turner optical path design based on a planar grating with a UV sensitive back-illuminated line array CMOS detector and a low stray light quality planar grating. The number of spectral channels 2048/4096 selectable, 16bit A/D digital to analog conversion 1-11X on-board analog gain, configured with a temperature sensor, real-time detection of the spectrometer key optical path device temperature. Based on nano-material extinction technology, stray light less than 0.1%, dark noise less than 30RMS (minimum integration time). Built-in embedded computing platform with 766MHZ, 1GDDR and 16GFlash, preloaded with Linux operating system and Uspectral-Gino spectrum acquisition software. Equipped with master/slave USB, Gigabit Ethernet RJ45, HDMI and Micro-SD card interfaces and 24PIN peripheral interface. The spectrometer is available in stand-alone or as a slave sensor mode. The spectrometer can operate in environments from -20 to 60 degrees Celsius, with a spectral temperature drift of 0.1pixel/°C. The spectrometer can be configured in high-speed configurations on request. With optional high-speed configurations up to 1400 fps, A/D quantization sampling and data transfer times below 700us (2048 channels), the Gino is an industrial-grade, miniature fiber-optic spectrometer that can be used for on-site, outdoor real-time measurements.
◆ 16bit A/D sampling, back-illuminated UV-enhanced CMOS detector, optional 2048/4096 sampling channels, integration time 60us-65S can be set;
◆ Nanomaterial-based extinction technology, stray light less than 0.1%;
◆ Single acquisition raw signal-to-noise ratio ≥ 400:1, on-board digital filter optimisation can be upgraded to ≥ 1000:1 (1ms integration);
◆ Single acquisition of the original dynamic range ≥ 3000: 1, on-board digital filter optimisation can be enhanced to ≥ 10000: 1 (1ms integral
Product Parameters |
|
Item | Value |
Spectral Range (Customizable) | 200-1100nm |
Resolution | Optimal up to 0.6nm |
Signal-to-noise Ratio | 400:1 |
Dynamic Range | 3000:1 |
Dark Noise | ≦30 |
Number of detector pixels | 2048/4096 |
Spectral Temperature Drift | 0.1 pixels/℃ |
Detector Integration Times | 60 µs - 65s |
Response linearity | ≥98% |
AD Sampling | 16 bit, AD sampling and data transfer time <750s |
Stray Light | <0.1% |
Optical Interface | Key-SMA905 |
Asynchronous reset external trigger | <40 ns, trigger jitter 10ns |
Extended Function Interface | USB、 RJ45、HDMI、Micro-SD卡、 24pin |
Capture Mode | Single, Continuous, Software Trigger, Synchronous External Trigger, Asynchronous Reset External Trigger |